C O N T E N T S

 

About Us
Some information about our company

 

Sales
Information about the products and services we offer

 

Repairs
About equipment repairs and maintenance contracts

 

Catalog
On our new Catalog page, you can shop for filters & more!

 

What's New
Recent updates in our field

 

FAQ
Frequently Asked Questions

Frequently Asked Questions

My ten-year old air conditioner was called high-efficiency and I was told that was why the outdoor unit was so large. A neighbor replaced his air conditioner and his outdoor unit is about half the size of mine. Why is this?

Generally, higher efficiency units are larger than standard units. This is due to the added coil area for heat transfer. In addition, some manufacturers make units that are physically larger than other manufacturers. Some of this is due to their desire to make the unit quieter as well as more efficient. When a unit becomes larger, room becomes available to put the compressor in a sound insulated compartment instead of exposed in the fan compartment. It also permits the use of a larger fan blade spinning at lower speed, again to reduce the sound level.


What does SEER mean?

Season Energy Efficiency Ratio. It is a system for rating the efficiency of air conditioning equipment. SEER is calculated by dividing the cooling capacity in BTU/H, of a continuously operating air conditioner, by the electric power input, or watts, of power consumed. The higher your SEER, the less the unit will cost to operate.


What can you tell me about AFUE?

Furnace Efficiency is rated by its Annual Fuel Utilization Efficiency (AFUE). AFUE is the ratio of heat output divided by the heat input. This measures how completely the fuel, either gas or oil, is consumed to heat as the furnace heats your home. The higher the AFUE rating, the lower the fuel cost. Furnaces in the United States must have at least 78% AFUE.


 What is HSPF?

HSPF stands for Heating Seasonal Performance Factor. This measures the efficiency of the heating portion of the heat pump. A higher number means the unit works more efficiently.


What is a heat pump?

A heat pump combines cooling and heating capability in one unit. When cooling, the heat pumps operates like an air conditioner, removing the heat from indoors and transferring it outdoors. In the winter the heat pump takes heat from the outdoors and transfers it inside your home. Even at freezing temperatures, there is still heat in the outdoor air that can be used to warm a home by using a heat pump. To augment the heat pump on very cold days, electric resistance heaters are installed in the indoor section of the unit.


What is Freon/R-22?

Hydrochlorofluorocarbon (HCFC), known as R-22 has been used as a refrigerant for more than 40 years by HVAC manufacturers. While HCFC's are considered safe for the environment they do contain chlorine which is classed as an ozone-depleting chemical. The Clean Air Act set a target date of January 1, 2010 after which HVAC manufacturers can no longer build products that use R-22. Manufacturers  of refrigerants will still be allowed to produce R-22 until January 1, 2020 after which time only recovery and recycling will provide R-22 for servicing older installed systems.


 What is R-410A?

R-410A is a hydro fluorocarbon (HFC), which is an environmentally friendly refrigerant that is considered by most to be the likely replacement for R-22.


Why should I replace my existing furnace and/or air conditioning system if it is still functioning?

You should consider replacing your system if it is old, and therefore less efficient or if it might need repairing in the near future. Systems today can be 60% more efficient than systems built as little as 10 years ago. Normal wear and tear can reduce the efficiency of your system. If you have large utility bills or are if you are facing an expensive repair, you may want to consider replacing the entire system. Going through another costly season of utility bills or paying for an expensive part failure can go a long way toward the cost of a new system.


 How do I know what to buy?

Make sure the unit that you select is the correct size for your needs. Systems that are too large or too small can be inefficient. We would be pleased to provide an energy analysis to show you the true operating cost. We will help you understand your options. You should consider specific comfort issues in your home. If anyone has allergies, an air filtration system should be considered as part of the installation.

Some of the many variables to be considered in determining the system requirements are: square feet to be served,  area climate, humidity, number of windows in the home, insulation, which direction your home faces, what heat producing appliances are installed, including home computers, and the number of people who will be in the home.


 What else might be needed if I replace my old system?

Other items need to be inspected and possibly replaced, such as, thermostat, ducts, refrigerant piping, electrical service, wiring, condensate piping, insulation, flue piping and terminations, chimney liner, slabs, filter, registers, grills, drain pans and evaporator coil.


Should I change my indoor coil?

When replacing your air conditioner or heat pump the answer is probably yes. Efficiency ratings are based on a matched system. If only the outdoor portion is changed the efficiency could be lowered and therefore your savings could be less.


We have a larger home with a couple of rooms that we don't use. Can I close the vents in those rooms?

Yes, within limits. If you have a large house with 20 or more vents, closing 2 vents is a 10% reduction in air flow and probably will be tolerated OK by the system. If you have a smaller house or apartment with only 6 vents total, closing 2 vents would represent a 33% reduction in air flow and would probably cause the air conditioner to freeze up. If running in the heating mode, it could cause the unit to trip on high limit. One additional word of caution. The more vents you close, the more critical it is to make sure you are always running with a clean filter.


How long should my unit last?

With proper maintenance, industry averages suggest that an air conditioner should last 12-15 years (high humidity/salt air applications may be less than that) and a gas furnace should last as long as 20 or 25 years.


What is a "zoned system"

Zoned systems eliminate "hot and cold spots" and can help save energy. Your house is split into areas with common heating and cooling requirements, and every "zone" is under the control of its own thermostat. Each zone is heated or cooled independently of other zones. Zoning can reduce energy bills as much as 30%.


How often should I change or clean my filters?

Dirty filters should be replaced to prevent equipment from working harder, resulting in energy waste and possibly causing damage to your unit. Filters should generally be replaced every month when the system is running. Filters should be replaced with the same kind and size as your original filter. If the filter is not disposable, follow the manufacturer's instructions for cleaning it. The pre-filter and collection cells of an electronic air cleaner should be cleaned at least two or three times per year.


 Should I cover my outdoor unit in the winter?

 Covering the unit is not necessary. Air conditioners are built to withstand a wide range of climate changes. Rain even helps keep your unit clean. Heat pumps run all year long so they should not be covered.


Should I set my thermostat fan to the "ON" position so the fan runs all the time?

There are advantages. One is full-time filtering. Another is that you can maintain a more even temperature in your home.


 How close to the outdoor unit can I plant flowers or bushes?

 Plants probably should not be closer than 18 or more inches. Air conditioners need air circulation to operate efficiently. If air cannot circulate, the unit could build up heat and waer out. Also, when the unit needs normal maintenance, plantings closer than 18 inches make it difficult to service.


Should I be concerned about the possibility of having carbon monoxide in my home?

 Yes. Carbon monoxide can cause serious health problems and possibly death.


 What is carbon monoxide?

 Carbon monoxide (CO) is a colorless, odorless, tasteless gas that is produced by the incomplete combustion of fossil fuels. Appliances such as your furnace, space heater, water heater, stove, charcoal grill or gas dryer can be sources of carbon monoxide, especially if they are not in proper working condition, or have been installed improperly. Vehicle exhaust fumes from attached garages, and improperly operating fireplaces also can be hazards. If your home has been tightly sealed for energy efficiency CO can be an even worse problem.


 What are some of the symptoms of carbon monoxide poisoning?

 The symptoms caused by carbon monoxide poisoning are easily overlooked because they are often like the flu. With mild exposure, most people experience headaches, fatigue and nausea. Medium exposure can cause a severe throbbing headache, drowsiness, disorientation, confusion and an accelerated heart rate. Extreme exposure can lead to unconsciousness, convulsions, heart or respiratory failure, coma and even death.


 How can I detect carbon monoxide in my home?

 The best method of detection is to use a carbon monoxide detector in your home. It monitors the air for carbon monoxide and sounds an alarm if harmful levels are detected. We can install monitors for you.


How often should I change or clean my filters?

Check the filter every 3 to 4 weeks. Replace your filter when necessary, or clean it if you have the reusable type. Reusable filters, should be completely dry before they are re-installed.
 

For some good tips on what to do before calling for service and for suggestions on duct-balancing along with other operating tips for your heating, cooling, and heat pump systems, please click here to download a PDF of a handy booklet that we provide to our customers.

If your home or business is located in one of these Philadelphia area communities, we have probably served one of your neighbors!

Abington
Ambler
Audubon
Bala Cynwyd
Bensalem
Berwyn
Blooming Glen
Blue Bell
Bridgeport
Bristol
Bryn Athyn
Bryn Mawr
Buckingham
Center Square
Chalfont
Cheltenham
Collegeville
Colmar
Conshohocken
Downingtown
Doylestown
Dresher
 

Elkins Park
Fairless Hills
Fort Washington
Franconia
Glenside
Green Lane
Gwynedd
Gwynedd Valley
Harleysville
Hatboro
Hatfield
Horsham
Huntingdon Valley
Jenkintown
King of Prussia
Kulpsville
Lafayette Hill
Langhorne
Lansdale
Levittown
Line Lexington
Lumberville

Maple Glen
Mechanicsville
Montgomeryville
New Britain
New Hope
Newtown
Norristown
North Wales
Oreland
Penllyn
Pennsburg
Perkasie
Perkiomenville
Philadelphia
Phoenixville
Plumsteadville
Plymouth Meeting
Quakertown
Roslyn
Royersford

Please contact our Webmaster with questions or comments.
© Copyright 2010 J. A. Smith Heating & Air Conditioning, Inc. All rights reserved.

Rydal
Salford
Salfordville
Schwenksville
Sellersville
Skippack
Souderton
Southampton
Telford
Trevose
Valley Forge
Warminster
Warrington
West Chester
West Conshohocken
West Point
Willow Grove
Worcester
Wycombe
Wyncote
Yardley